Multifunctional surfactant that can be used as: pressure reduction in disposal wells; wetting solids; and paraffin dispersion. It can be diluted in either water or aromatic solvents.

Blend of surfactants and wetting agents

Blend of surfactants and wetting agents.

Used in all fresh water and brine based packer (annular) inhibitors. If the treatment water contains calcium levels over 10,000 ppm, the product should be checked for solubility in the brine.

  Foaming agents.

Dosage will be dependent upon brine concentration, hydrocarbon concentration in the water and temperature requirements.

Anionic Surfactant, Dicotyl Sulfosuccinate, Sodium Salt.

Emulsifier, Detergent, Wetting Agent, and Dispersant.

Cocamidopropyl Hydroxysultaine Foaming Agent..

Amphoteric Surfactant used as a stand-alone foamer, or as a booster depending upon the severity of the well. The product will work in a large pH range and is effective in both brine and brine/oil/condensate systems. 

 Cocamidopropyl Betaine Foaming Agent..

Amphoteric Surfactant used as a stand-alone foamer, or as a booster depending upon the severity of the well, and can be used in drilling, cementing, completion, stimulation, fracturing, and production applications.

 Cocoamidopropyl Hydroxysultaine Surfactant.

Foaming agent, primary & secondary emulsifier, foam booster and viscosity builder for drilling, cementing, completion, stimulation, fracturing and production chemical applications.

Ammonium Alkyl Ether Sulphate Foaming Agent.

Anionic Surfactant used as a stand-alone foamer or as a booster depending upon the severity of the well. This product can be used in drilling, cementing, completion, stimulation, fracturing, and production applications and has a large window of solubility in both brine and hydrocarbon. 

  Ammonium Alkyl Ether Sulphate Foaming Agent.

Anionic Surfactant used as a stand-alone foamer or as a booster depending upon the severity of the well. This product can be used in drilling, cementing, completion, stimulation, fracturing, and production applications and has a large window of solubility in both brine and hydrocarbon.

Unique blend of surface-active agents in an aromatic solvent.

Sand Dispersant effective at reducing surface tension in liquids and interfacial tension of liquid / solid systems. Used to reduce surface tension in high sand emulsions and oil transportation systems (preventing plugging). 

Solids Dispersant specially formulated to dissolve and disperse asphaltene and paraffin deposition.

Can be used both downhole to remedy formation issues with paraffin and asphaltene solids and in other production chemical equipment. (pipelines, vessels, tanks, equipment) 

 Drag Reducing Agent (DRA) classified as an ultra- high molecular weight PAO (Polyalphaolefin).

Designed to increase the flow rate by reducing the pressure drop in crude oil pipelines. It works by reducing the turbulent burst found in oil pipelines, thus reducing the energy consumption. 

 Mixture of a surface- active agents in a hydrocarbon solvent.

Flow Improver for oil production. Significantly reduces the surface tension in emulsions allowing for reduced pressures and thus maximizing flow. Used in light, medium and heavy crudes, reducing diluent flow use up to 50%.

 Fast hydrating, concentrated dry friction reducer.

Hydrates rapidly in fresh water and salt-water brines. It has the advantages of being more concentrated and does not have a limited shelf life as liquid emulsions

Mixture of a surface-actives agent in a hydrocarbon solvent with high flammable point.

Flow Improver for oil production. Significantly reduces the surface tension in emulsions allowing for reduced pressures and thus maximizing flow. Used in light, medium and heavy crudes, reducing diluent flow use up to 50%.experience, what makes a product special, or a unique service that you offer.

Mixture of a surface-actives agent in a hydrocarbon solvent with high flammable point.

Flow Improver for oil production. Significantly reduces the surface tension in emulsions allowing for reduced pressures and thus maximizing flow. Used in light, medium and heavy crudes with high asphaltene contents, reducing diluent flow use up to 50%.